JX Internal Steel Tube Shot Blasting Machines are used in the surface treatment for inner wall of steel tube, wiping up the oxide coating, welding slag, appearing the metallic sheen, increasing the area of the surface.
Internal steeltube shot blasting machine for surface treatment,wiping up the oxide coating, welding slag, appearing the metallic sheen,increasing the area of the surface, which is in favor of UV. It applies in the line of petroleum &chemical,steel,city group heating,group drainage etc.

Advantage:
Improving anti-fatigue character of mechanical products and steel structure parts.
1. Removing stress concentration.
2. Extending its wear life.
3. Optimize surface technology state of work pieces.
4. Increasing cleaning efficiency enormously.
5. Reducing labour strength of cleaning job.
6. Reducing environmental pollution.

These Type of Machines consist of under mentioned Parts:
1. Main Blast Cabinet with inspection Door
2. Blast Wheel Units with Drive Mechanism.
3. Abrasive circulation unit
4. Bucket Elevator unit
5. Abrasive Separation/Cleaning system with Storage Hopper
6. Dust Collector with Cleaning Mechanism.
7. Roller Conveyor system at Inlet & Outlet Side.
8. Control Panel with PLC Control System.

If you are interested in our products, welcome to contact us and we will reply you within 24 hours.For more information, welcome to our homepage: https://www.jxabrasives.com

JX Abrasives manufactures customized steel bar shot blasting machine to meet the customers’exact specifications, our machine is superior to any other typical equipment manufactured by other companys. Our machine from single wire to multi bar machine, processing up to 18 bars at a time.
Steel Bar Shot Blasting Machine is widely used for metal gridding, steel tube, petroleum, chemical, electric power industry. It is a kind of dry cleaning machinery. In the process of forming, processing, transporting and storing of the work piece, there will always be oxide coating, rust, slag, dust, oil and others on the surface. The Steel Bar Shot Blasting Machine uses high-speed blast to strike and cut the surface of the work piece in dry and non-fluid media, and realize the cleaning purpose.

Typical Application:
1. Remove rust and oxide layer on the surface of the wire.
2. After blasting, wire rod surface presents a uniform roughness, which will help to increase the adhesion of the aluminum clad copper clad, cladding uniform will never fall off.
4. Eliminate the internal stress generated in the wire drawing process.
5. Increase the wire surface tensile strength and resistance to stress corrosion cracking, permanent life. The machine is best suitable models for wire surface oxide skin treatment.

These Type of Machines consist of under mentioned Parts:
1. Main Blast Cabinet with inspection Door
2. Blast Wheel Units with Drive Mechanism.
3. Abrasive circulation unit
4. Bucket Elevator unit
5. Abrasive Separation/Cleaning system with Storage Hopper
6. Dust Collector with Cleaning Mechanism.
7. Roller Conveyor system at Inlet & Outlet Side.
8. Control Panel with PLC Control System.